ESP32 Ultimate Starter Learning Kit
This comprehensive component bundle is designed for developers and hobbyists looking to prototype IoT (Internet of Things) and automation projects using the ESP32 platform. It includes a dual-core ESP32 development board along with a variety of sensors for detecting motion, distance, light, temperature, and humidity. The kit also provides output components like a 0.96" OLED display, relays, and buzzers to build interactive systems.
Core Controller & Display
- ESP32 Development Board: Dual-core 240MHz MCU with integrated Wi-Fi and Bluetooth. 38-pin version (standard).
- 0.96" OLED Display: 128x64 resolution, SSD1306 driver, I2C interface for showing sensor data or UI menus.
- Micro-USB Cable: 50cm cable for power and programming via PC.
Sensors & Input Modules
- DHT11 Module: Digital sensor for measuring ambient temperature and relative humidity.
- HC-SR501 PIR Sensor: Passive infrared module for motion detection and security applications.
- Infrared Obstacle Avoidance Module: IR emitter/receiver pair for short-range proximity detection.
- Photoresistor Module: Light-dependent resistor (LDR) for detecting ambient brightness levels.
- 10k Potentiometer: Rotary variable resistor for analog input control (volume, brightness, etc.).
Outputs & Controls
- 5V 2-Way Relay Module: Allows the ESP32 to switch two high-voltage/high-current devices (AC or DC).
- Passive & Active Buzzers: One for generating simple tones (active) and one for complex frequencies/melodies (passive).
- LED Assortment: 15 standard LEDs (Red/Blue/Green) and 1 RGB LED for multi-color status indication.
- Switch Keycaps: 6 tactile buttons with color-coded caps for user input.
Prototyping & Hardware
- 830-Point Breadboard: Full-size solderless breadboard for circuit assembly.
- DuPont Jumper Wires: 30 wires total (10x Male-to-Male, 10x Female-to-Male, 10x Female-to-Female).
- Resistor Pack: 30 resistors total (10x 220Ω for LEDs, 10x 1kΩ, 10x 10kΩ for pull-ups).
Package Contents
| Quantity | Component Description |
|---|---|
| 1 | ESP32 Development Board (38-pin) |
| 1 | 0.96" OLED Display (I2C) |
| 1 | 830-Hole Breadboard |
| 1 | DHT11 Temperature/Humidity Module |
| 1 | HC-SR501 PIR Motion Sensor |
| 1 | IR Obstacle Avoidance Sensor |
| 1 | Photoresistor (LDR) Module |
| 1 | 5V 2-Channel Relay Module |
| 1 | 10k Potentiometer |
| 1 | Active Buzzer + 1 Passive Buzzer |
| 1 | RGB LED (Common Cathode) |
| 15 | Standard LEDs (5x Red, 5x Blue, 5x Green) |
| 30 | Resistor Set (10x 220R, 10x 1k, 10x 10k) |
| 30 | DuPont Wires (M-M, F-M, F-F) |
| 6 | Tactile Switches with Keycaps |
| 1 | Micro-USB Cable |